WE’s L85A2 carbine replica is an exact duplicate of the L85 assault weapon, which is standard-issue equipment for front-line units in the United Kingdom. This rifle has the the same unique design and features accurate controls and feel. It has all of the benefits of the original but none of the drawbacks. It is a replica that is easy to operate, accurate, and manoeuvrable, while still retaining tremendous firepower. Because of its bullpup construction, a satisfying compromise between barrel length (which affects precision) and replica size has been achieved. The rifle has a bullpup design which means the magazine is behind the trigger unit, this makes the barrel much longer giving the rifle more accurate and consistent. this makes the gun a similar sizes of the m4 model but with a more accurate performance.

The replica’s main structure was composed of steel, as well as zinc and aluminium alloy. The receiver, trigger guard, and flash hider are all made of steel. The pistol grip linings, handguard, trigger, and cheek pad were all made of elastic ABS polymer. The stock pad is constructed of thick, contoured anti-slip rubber. All of this contributes to the replica’s weight being only slightly different from the original.

WE green gas M4/M16 (STANAG) magazines are compatible with the replica. Its operation is quite dependable, which means it not only looks attractive but also serves effectively. The installed blow-back technology delivers a solid impression of greater realism while use, as expected of a WE GBB copy. It is worth noting that, in compared to standard GBB reproductions (e.g., M4 or SCAR), the effect of the blow back is significantly stronger and much closer to the original due to the displacement of the entire system further to the rear.

Nylon Fiber Handguard, Pistol Grip, Cheek Piece With Rubber Stock Pad (Olive Drab)
Steel Receiver and Carry Handle / Aluminum Outer Barrel (Desert)
Open Bolt System
Adjustable HOPUP System
Carry Handle integrated with Rear Iron Sights

Package Contents:

L85 Rifle Gun x 1pc
Magazine x 1pc

G&G have been manufacturing a great line of L85 / SA80 replica weapons that features their new ETU and MOSFET systems allowing the use of 11.1v LiPo for a reliable rate of fire and easy trigger pull, and to top it all off: electric blowback. It has a long barrel length and more than enough battery space for a days skirmishing. The L85 kicks nicely into the shoulder when fired due to it's impressive blow back system, which can easily be disabled if required but which adds to it’s realism.

The replica is built from high quality materials, including Aluminum, Nylon, Fiber, Steel, Zinc, and Polymers. The replica features a full metal body and outer barrel, with a polymer cheek rest, pistol grip, and handguard, with a rubberised butt plate. 

Externally the replica has everything you would come to expect from an L85 replica, with all of the replica parts which would make it an A1 version, with the standard straight charging handle. The replica features a rubberised cheek rest and butt plate to prevent slippage, and a large hand guard with opening top cover where they batteries are stored which power the replica. 

Internally the replica features G&Gs new ETU system which makes it stand out from all the other available replicas on the market.  The replica includes an Electronic Trigger Unit, making the trigger pull light and consistent. The ETU also helps prevent gearbox locking when rapid firing on single shot, as well as preventing the classic fault of trigger contact failure. The trigger can also be programmed to fire in three round burst. The weapon also features a MOSFET which allows for the use of 11.1v batteries. Thanks to the power of 11.1v LiPo the blowback mechanism is crisp, making the gun even more fun to use.

This replica is perfect for those Airsoft Skirmishers who are looking to put together a British Army loadout, or for those who love the look of Bullpup AEG.

Features

• G&G ETU MOSFET System
• Electronic microswitch trigger
• Based on the L85 A1
• 11.1v Li-Po battery ready
• Safe, Semi and Fully Automatic firing modes
• Programmable 3 round burst setting
• Piston driven electronic blowback
• Strong blowback action
• Top dovetail mount rail
• Detachable front sight
• Pistol grip storage compartment
• Front and rear sling loop points
• Large battery storage compartment in the handguard
• Rubberised butt plate to prevent slippage
• Rubberised cheek rest for comfort
• Mock bolt plate can be locked back for access to the hop-up
• Adjustable gear based hop-up system for range and accuracy
• Hi-roque long axis motor
• 8mm Brass bushings
• 413mm inner barrel
• 45rnd Hi-Capacity Magazine

Package Includes

• L85 A1 Carbine ETU Series AEG
• Magazine
• Instruction Manual

G&G have been manufacturing a great line of L85 / SA80 replica weapons that features their new ETU and MOSFET systems allowing the use of 11.1v LiPo for a reliable rate of fire and easy trigger pull, and to top it all off: electric blowback. 

The replica is built from high quality materials, including Aluminum, Nylon, Fiber, Steel, Zinc, and Polymers. The replica features a full metal body and outer barrel, with a polymer cheek rest, pistol grip, and handguard, with a rubberised butt plate. 

Externally the replica has everything you would come to expect from an L85 replica, with all of the replica parts which would make it an A1 version, with the standard straight charging handle. The replica features a rubberised cheek rest and butt plate to prevent slippage, and a large hand guard with opening top cover where they batteries are stored which power the replica. 

Internally the replica features G&Gs new ETU system which makes it stand out from all the other available replicas on the market.  The replica includes an Electronic Trigger Unit, making the trigger pull light and consistent. The ETU also helps prevent gearbox locking when rapid firing on single shot, as well as preventing the classic fault of trigger contact failure. The trigger can also be programmed to fire in three round burst. The weapon also features a MOSFET which allows for the use of 11.1v batteries. Thanks to the power of 11.1v LiPo the blowback mechanism is crisp, making the gun even more fun to use.

This replica is perfect for those Airsoft Skirmishers who are looking to put together a British Army loadout, or for those who love the look of Bullpup AEG.

Features

• G&G ETU MOSFET System
• Electronic microswitch trigger
• Based on the L85 A1
• 11.1v Li-Po battery ready
• Safe, Semi and Fully Automatic firing modes
• Programmable 3 round burst setting
• Piston driven electronic blowback
• Strong blowback action
• Top dovetail mount rail
• Detachable front sight
• Pistol grip storage compartment
• Front and rear sling loop points
• Large battery storage compartment in the handguard
• Rubberised butt plate to prevent slippage
• Rubberised cheek rest for comfort
• Mock bolt plate can be locked back for access to the hop-up
• Adjustable gear based hop-up system for range and accuracy
• Hi-roque long axis motor
• 8mm Brass bushings
• 413mm inner barrel
• 45rnd Hi-Capacity Magazine

Package Includes

• L85 A1 Carbine ETU Series AEG
• Magazine
• Instruction Manual

G&G have been manufacturing a great line of L85 / SA80 replica weapons that features their new ETU and MOSFET systems allowing the use of 11.1v LiPo for a reliable rate of fire and easy trigger pull, and to top it all off: electric blowback.

This Airsoft gun is a replica of the famous L85 / SA80 used by the British Armed Forces as their standard issue rifle. The replica is built from high quality materials, including Aluminum, Nylon, Fiber, Steel, Zinc, and Polymers. The replica features a full metal body and outer barrel, with a polymer cheek rest, pistol grip, and handguard, with a rubberised butt plate. 

Externally the replica has everything you would come to expect from an L85 replica, with all of the replica parts which would make it an A2 version, with an enlarged curved charging handle. The replica features a rubberised cheek rest and butt plate to prevent slippage, and a large hand guard with opening top cover where they batteries are stored which power the replica. 

Internally the replica features G&Gs new ETU system which makes it stand out from all the other available replicas on the market.  The replica includes an Electronic Trigger Unit, making the trigger pull light and consistent. The ETU also helps prevent gearbox locking when rapid firing on single shot, as well as preventing the classic fault of trigger contact failure. The trigger can also be programmed to fire in three round burst. The weapon also features a MOSFET which allows for the use of 11.1v batteries. Thanks to the power of 11.1v LiPo the blowback mechanism is crisp, making the gun even more fun to use.

This replica is perfect for those Airsoft Skirmishers who are looking to put together a British Army loadout, or for those who love the look of Bullpup AEG.

Features

• G&G ETU MOSFET System
• Electronic microswitch trigger
• Based on the L85 A2
• 11.1v Li-Po battery ready
• Safe, Semi and Fully Automatic firing modes
• Programmable 3 round burst setting
• Piston driven electronic blowback
• Strong blowback action
• Top dovetail mount rail
• Detachable front sight
• Pistol grip storage compartment
• Front and rear sling loop points
• Large battery storage compartment in the handguard
• Rubberised butt plate to prevent slippage
• Rubberised cheek rest for comfort
• Mock bolt plate can be locked back for access to the hop-up
• Adjustable gear based hop-up system for range and accuracy
• Hi-roque long axis motor
• 8mm Brass bushings
• 413mm inner barrel
• 45rnd Hi-Capacity Magazine

Package Includes

• L85 A2 Carbine ETU Series AEG
• Magazine
• Instruction Manual

Now this is a weapon built like a tank! This G&G L85 replica comes with the performance you would love and expect from a modern Airsoft weapon, and it does not disappoint. 

G&G have given the L85 AFV their ETU and MOSFET treatment which lets you use 11.1v batteries, meaning a crazy high rate of fire, easy trigger pull and an earth-shaking piston-driven blowback to top it all off! Plus the included 4 x SUSAT optic.

G&G have manufactured a L85 AFV replica that is just insanely genius. This weapon is the closest you can possibly get to owning a real L85 AFV without signing up. Weighing in at ~4kg, this replica actually slightly exceeds the unloaded weight of the real thing. Featuring realistic construction such as the stamped steel and heat-treated receiver along with high quality Polymers on the grips. The weapon has received the G&G treatment by way of an Electronic Trigger Unit, making the trigger pull light, pleasant and consistent. The ETU also helps prevent gearbox locking when rapid firing on single shot, as well as preventing the classic fault of trigger contact failure. The weapon also features a MOSFET which allows for the use of 11.1v batteries.

G&G L85 AFV ETU provides one of the most fun shooting experiences you can ever have in Airsoft from the rate of fire when using 11.1v which is pure genius combined with the piston-driven electric blowback. 

Features:
Electronic Trigger Unit
MOSFET
11.1v ready
Piston-driven blowback
Weighs in at ~4kg
High rate of fire
Strong blowback
Stamped steel receiver
CNC Aluminium one-piece outer barrel
Breaks down just like the real thing
Removable carry handle
Removable front sight
Can be fitted with SUSAT
14mm CCW threaded barrel
Highest quality construction materials
Feels great in the hands
300rnd hi-cap included
585mm overall length

Package Includes:
L85 AFV ETU w/ SUSAT Sight