GPM92 pistol replica is the first pistol replica with Blow-Back by G&G. The replica is made mainly of metal. Polymer parts include pistol grip panels, providing them additionally with anti-slip texture. Grip panels also feature the manufacturer’s logo. The replica is equipped with an underbarrel RIS rail that enables the attachment of additional accessories such as a laser sight or a flashlight. There is even a tactical sling loop near the magazine, intended for sidearms. 

The set also includes a metal gas magazine and is packed in an elegant, lockable case with the manufacturer’s logo. 

The GPM92 come with some not seen before solutions. The first one is a high-bandwidth gas valve equipped with a micro-filter that is responsible for allowing the ideal amount of gas only in airborne state - all remaining gas remains in the magazine. The use of a special valve allows preventing an uncontrolled gas leak, thus providing a greater safety of use of the replica. Yet another interesting solution is a specially-designed cylinder valve equipped with lopatki that cause it to rotate around its own axis. The gas that at the same time rotates the valve and doses the gas for firing a BB creates pressure that pushes back the slide. 

**Warning!!** This item will require a defence to be supplied. You can either email this with a copy of your photo ID or wait for us to contact you. If you have purchased from our selves previously and have supplied a defence you will not need to do this again

**Warning!!** This item will require a defence to be supplied. You can either email this with a copy of your photo ID or wait for us to contact you. If you have purchased from our selves previously and have supplied a defence you will not need to do this again.

**Warning!!** This item will require a defence to be supplied. You can either email this with a copy of your photo ID or wait for us to contact you. If you have purchased from our selves previously and have supplied a defence you will not need to do this again.

The VORSK VM9 is a Full-Metal GBB Airsoft Replica that features both VORSKs distinct style and flair whilst incorporating ‘tactical’ features welcome on any airsoft sidearm.

When setting eyes upon the VORSK VM9, one will immediately notice the raised rail section to the back of the slide that both houses the rear green fibre sights as well as providing a stable platform for all your aftermarket sights/ optics. This rail features a cut-out through the centre, used to align the rear and raised forward fibre sight. What was the standard 180° ejection port opening now features six cut-out “fins” that line up nicely with the rear slide grip markings and with the mounted rail, gives a very aggressive looking slide package. As with most VORSK replicas, the 6.03mm inner barrel is threaded to accept VORSKs barrel extending suppressor kits (the outer barrel is also threaded for your suppressors/ tracers). When primed for fire in the triggers “single-action” position, the fire control can be moved through to the “safe” position which ‘decocks’ the hammer and also disengages the trigger ensuring the VM9 is completely “safe” when in those no-fire zones. Disengaging the safety allows the trigger to move again, and so long as there is a remaining round in the chamber, one can then fire the VM9 through the “long-pull” of the double-action trigger that first pulls back the hammer before release unto the firing pin. Other furniture within reach include the slide-release, magazine release and of course the hammer itself. The VM9 platform features a very intuitive, simple to use slide release that will encourage you to get inside and tweak that hop-unit, as well as deliver all the standard lubricating care a full-metal GBB sidearm requires. The moulded, stippled pistol grip is the only large section of polymer found on this replica and wraps around a double-stacked magazine ensuring a firm and chunky grip. The magazine itself features a ‘mid-range’ extension providing up to 30 rounds and a larger gas reservoir than the typical VM9 magazine that was supplied with the VM9 OSIRIS from VORSK. Due to it being the same platform, standard VM9 and extended 50R magazines are also available from VORSK.

The VM9 is another striking airsoft platform from VORSK where their design choices have moved away from the standard looks of the regular sidearm, whilst also bringing in practical features that both enhance the style and performance of this replica.

**Warning!!** This item will require a defence to be supplied. You can either email this with a copy of your photo ID or wait for us to contact you. If you have purchased from our selves previously and have supplied a defence you will not need to do this again.

The VORSK VM9 is a Full-Metal GBB Airsoft Replica that features both VORSKs distinct style and flair whilst incorporating ‘tactical’ features welcome on any airsoft sidearm.

When setting eyes upon the VORSK VM9, one will immediately notice the raised rail section to the back of the slide that both houses the rear green fibre sights as well as providing a stable platform for all your aftermarket sights/ optics. This rail features a cut-out through the centre, used to align the rear and raised forward fibre sight. What was the standard 180° ejection port opening now features six cut-out “fins” that line up nicely with the rear slide grip markings and with the mounted rail, gives a very aggressive looking slide package. As with most VORSK replicas, the 6.03mm inner barrel is threaded to accept VORSKs barrel extending suppressor kits (the outer barrel is also threaded for your suppressors/ tracers). When primed for fire in the triggers “single-action” position, the fire control can be moved through to the “safe” position which ‘decocks’ the hammer and also disengages the trigger ensuring the VM9 is completely “safe” when in those no-fire zones. Disengaging the safety allows the trigger to move again, and so long as there is a remaining round in the chamber, one can then fire the VM9 through the “long-pull” of the double-action trigger that first pulls back the hammer before release unto the firing pin. Other furniture within reach include the slide-release, magazine release and of course the hammer itself. The VM9 platform features a very intuitive, simple to use slide release that will encourage you to get inside and tweak that hop-unit, as well as deliver all the standard lubricating care a full-metal GBB sidearm requires. The moulded, stippled pistol grip is the only large section of polymer found on this replica and wraps around a double-stacked magazine ensuring a firm and chunky grip. The magazine itself features a ‘mid-range’ extension providing up to 30 rounds and a larger gas reservoir than the typical VM9 magazine that was supplied with the VM9 OSIRIS from VORSK. Due to it being the same platform, standard VM9 and extended 50R magazines are also available from VORSK.

The VM9 is another striking airsoft platform from VORSK where their design choices have moved away from the standard looks of the regular sidearm, whilst also bringing in practical features that both enhance the style and performance of this replica.

**Warning!!** This item will require a defence to be supplied. You can either email this with a copy of your photo ID or wait for us to contact you. If you have purchased from our selves previously and have supplied a defence you will not need to do this again.

The OSIRIS is a Select Fire, GBB Pistol brought to you by the team at VORSK Airsoft.

The OSIRIS is built upon the famous M9 platform but with a few key design changes. Inspired by a real-steel concept of this trusty sidearm, the OSIRIS is a full-auto replica with a reinforced slide and fitted with a picatinny accessory rail.

The most notable of these changes is the reinforced, solid slide which toughens the OSIRIS for those “high-stress” moments when unloading a full magazine on automatic fire downrange. Gone is the 180° ejection port and open-slide design, replaced by a thick, solid slide featuring strengthening lugs halfway down above the disassembly pin – giving the OSIRIS a unique look in the Airsoft world.

The ambidextrous select fire controls have been designed specifically for the OSIRIS allowing the user to quickly change between semi and full-auto. The rear features a standard, low-profile hammer, a VORSK branded polymer grip and a protective polymer magazine baseplate. Moving forward, the large trigger guard provides plenty of room for gloved fingers and there is a single-slot picatinny rail on the under barrel for lights/ lasers to be fitted. A threaded inner and outer barrel allow for the attachment of barrel accessories.

The OSIRIS is available in 4 colour options – a full Black (slide & receiver), full Silver, full Brushed Aluminium and full Dark Earth

**Warning!!** This item will require a defence to be supplied. You can either email this with a copy of your photo ID or wait for us to contact you. If you have purchased from our selves previously and have supplied a defence you will not need to do this again.

**Warning!!** This item will require a defence to be supplied. You can either email this with a copy of your photo ID or wait for us to contact you. If you have purchased from our selves previously and have supplied a defence you will not need to do this again.

**Warning!!** This item will require a defence to be supplied. You can either email this with a copy of your photo ID or wait for us to contact you. If you have purchased from our selves previously and have supplied a defence you will not need to do this again.

**Warning!!** This item will require a defence to be supplied. You can either email this with a copy of your photo ID or wait for us to contact you. If you have purchased from our selves previously and have supplied a defence you will not need to do this again.

The G&G GPM92 is the go to side arm in Airsoft with it realistic styling and wow factor. As we all know that this manufacturer is synonymous with outstanding reliability and performance. 

If you are new to Airsoft this is the weapon for you with a great feel and outstanding looks all encompassed in this weapon. 

This is a gas blow back weapon so you won’t be surprised when firing with a realistic recoil of the upper slid.

**Warning!!** This item will require a defence to be supplied. You can either email this with a copy of your photo ID or wait for us to contact you. If you have purchased from our selves previously and have supplied a defence you will not need to do this again.

GPM92 pistol replica is the first pistol replica with Blow-Back by G&G. The replica is made mainly of metal. Polymer parts include pistol grip panels, providing them additionally with anti-slip texture. Grip panels also feature the manufacturer’s logo. The replica is equipped with an underbarrel RIS rail that enables the attachment of additional accessories such as a laser sight or a flashlight. There is even a tactical sling loop near the magazine, intended for sidearms. 

The GPM92 come with some not seen before solutions. The first one is a high-bandwidth gas valve equipped with a micro-filter that is responsible for allowing the ideal amount of gas only in airborne state - all remaining gas remains in the magazine. The use of a special valve allows preventing an uncontrolled gas leak, thus providing a greater safety of use of the replica. Yet another interesting solution is a specially-designed cylinder valve equipped with lopatki that cause it to rotate around its own axis. The gas that at the same time rotates the valve and doses the gas for firing a BB creates pressure that pushes back the slide. 

**Warning!!** This item will require a defence to be supplied. You can either email this with a copy of your photo ID or wait for us to contact you. If you have purchased from our selves previously and have supplied a defence you will not need to do this again

The VORSK VM9 is a Full-Metal GBB Airsoft Replica that features both VORSKs distinct style and flair whilst incorporating ‘tactical’ features welcome on any airsoft sidearm.

When setting eyes upon the VORSK VM9, one will immediately notice the raised rail section to the back of the slide that both houses the rear green fibre sights as well as providing a stable platform for all your aftermarket sights/ optics. This rail features a cut-out through the centre, used to align the rear and raised forward fibre sight. What was the standard 180° ejection port opening now features six cut-out “fins” that line up nicely with the rear slide grip markings and with the mounted rail, gives a very aggressive looking slide package. As with most VORSK replicas, the 6.03mm inner barrel is threaded to accept VORSKs barrel extending suppressor kits (the outer barrel is also threaded for your suppressors/ tracers). When primed for fire in the triggers “single-action” position, the fire control can be moved through to the “safe” position which ‘decocks’ the hammer and also disengages the trigger ensuring the VM9 is completely “safe” when in those no-fire zones. Disengaging the safety allows the trigger to move again, and so long as there is a remaining round in the chamber, one can then fire the VM9 through the “long-pull” of the double-action trigger that first pulls back the hammer before release unto the firing pin. Other furniture within reach include the slide-release, magazine release and of course the hammer itself. The VM9 platform features a very intuitive, simple to use slide release that will encourage you to get inside and tweak that hop-unit, as well as deliver all the standard lubricating care a full-metal GBB sidearm requires. The moulded, stippled pistol grip is the only large section of polymer found on this replica and wraps around a double-stacked magazine ensuring a firm and chunky grip. The magazine itself features a ‘mid-range’ extension providing up to 30 rounds and a larger gas reservoir than the typical VM9 magazine that was supplied with the VM9 OSIRIS from VORSK. Due to it being the same platform, standard VM9 and extended 50R magazines are also available from VORSK.

The VM9 is another striking airsoft platform from VORSK where their design choices have moved away from the standard looks of the regular sidearm, whilst also bringing in practical features that both enhance the style and performance of this replica.

**Warning!!** This item will require a defence to be supplied. You can either email this with a copy of your photo ID or wait for us to contact you. If you have purchased from our selves previously and have supplied a defence you will not need to do this again.